In this second of three articles about bucket truck safety concerns, the next thing to consider is worksite inspections and the importance that it carries in lowering any potential risk factors. Worksite inspection is not a difficult process nor is it a lengthy process; however, it is indeed a very necessary process!
It is quite natural for operators of this vehicle to position it right next to the area where the work needs to be done. Consideration needs to be given to the importance of finding a proper spot to position the vehicle that is in close proximity to the work but also safe to both the driver and any onlookers. Before starting work, it is important to perform a thorough worksite inspection to make sure that the location is the correct one from which the vehicle should operate.
Before allowing a worker to begin the hydraulic lift process, here are some important items to ensure that the worker, as well as the truck, is operating in a worksite area that is safe.
- Find Level Ground – One of the most important things to consider when finding the correct spot to position the vehicle is the ground’s evenness. Look for a spot where the ground elevation is consistent. The more level the ground, the more balanced and safe the bucket truck can operate. Any irregularity of the ground could greatly affect its balance, which could cause it to tip over.
- Consider the Ground Stability – Since some soil is loose compared to other soil, it is important to be sure that the truck is positioned where the outriggers and the wheels will be on equally stable ground. Avoid positioning the vehicle on areas with loose soil, sand or mud since this type of material cannot provide a stable base for the wheels and the outriggers. A loose base could cause the outriggers and wheels to sink in which could compromise the vehicle’s stability.
- Consider the Immediate Wind Speed – This type of vehicle can only operate safely in almost non-existent wind conditions. Never lift the boom if the wind speed is more than 20 mph. Strong wind speed can affect the hydraulic lift’s stability, which could allow the vehicle to overturn or misalign the boom structure.
- Be Aware of Any Impending Storms – Working high up in the air on a tall metal boom is a recipe for disaster during any type of storm but especially during electrical storms. Steel is a very effective conductor of electricity! Do not consider any operation of the hydraulic boom when there is even the possibility of an electrical storm.
- Be Aware of Power Lines – When operating a bucket truck, it is important to position the vehicle away from power lines unless you are working for your local power company. Operating near power lines might cause the boom to get entangled, posing a huge risk of electrocution.
- Be Aware of Aerial Obstructions – Always choose a wide open aerial spot to position the bucket truck. Avoid any obstructions such as tree branches, since they could damage the boom.
- Be Aware of Traffic Congestion – Avoid operating the truck on busy roads or highways. If unavoidable, pick a time when the traffic is likely to be minimal and make sure the vehicle is well equipped with proper hazard devices and warning lights.
Performing a worksite inspection prior to operating a bucket truck is very important to make sure that the worker, as well as the truck, is operating with the least amount of risk involved. Being aware of the above items and alert to any changing conditions could save any company possible thousands of dollar in potential truck repairs or worker injuries. Injuries from bucket truck usage are definitely avoidable when worksite inspections are done!
Christopher M. Hunter is an expert in commercial specialty trucks. Click here to find out more about Bucket Truck Sales.
