Breathe New Life Into A Used Digger Derrick With Reconditioning!

Posted on May 18, 2012 by Andrew Matthews

When a commercial vehicle is five to ten years old, there can be increasing difficulty in delivering the kind of service that is wanted and needed by a company. Many used commercial vehicles being sold have undergone repairs and maintenance to restore them to nearly new condition so that ongoing reliability to meet business objectives can be achieved.

When buying a used digger for sale, there are many mechanical problems that could arise during the remainder of a normal service life that could result in negative financial consequences. To avoid such an occurrence, it is imperative to thoroughly inspect any vehicle being considered for purchase and seek a fully reconditioned model for maximum performance and dependability.

Selection Reasons

Choosing a reconditioned truck can allow a business to continue to be profitable while meeting and accomplishing everyday challenges. When used trucks are restored to good condition, maximum performance can be provided while maintenance costs can be minimized and safety with machine reliability can be increased. Automotive technicians use various methods to deliver quality service that can decrease breakdowns and increase the equipment’s potential.

When buying a used digger for sale, it is essential to find one that has been fully reconditioned. Aside from the ability to enhance a company image, it can save in operating costs by: decreasing breakdowns; increasing performance efficiency and productivity; being more economical; lengthening service life; maintaining a company’s investment; and neutralizing an aging fleet. With current economic conditions, many companies are choosing to purchase reconditioned rather than new because of a positive impact on operating costs.

Process

Reconditioning includes a thorough inspection and dismantling to determine if any components need to be repaired or replaced which should be handled by a technician who can detect and reveal any mechanical problems. The truck will then undergo a restoration process where essential parts such as gears, brake systems, hydraulics, differentials, bearings, pistons, cylinder covers, axles, rubber linings and wheel drums are cleaned and degreased to be sure that the machine will function at peak capacity and future expenses reduced. The exterior is then completely sanded; dents pulled, and rusted metal removed; after that the body is repainted including the chassis.

After everything has been thoroughly checked, degreased, and repainted, all components and broken parts are restored, replaced, and reassembled to be sure that the truck is in top shape and fully capable of proper functioning. A final inspection is then normally conducted by automobile experts to be certain that the vehicle is in outstanding condition and safe to use in daily operations.

Purchasing a used digger for sale is another way to help a company’s business operations without costing too much money. Buying used equipment is logical if it has been fully overhauled in order to achieve its full potential. Reconditioning such vehicles removes the need for repairs and decreases operating expenses with proper maintenance. Constant breakdowns can be prevented from happening in the middle of a job, which could otherwise adversely affect production. Reconditioning can breathe new life into a digger derrick and restore its optimal performance!

Posted in Digger for Sale | Tagged | Leave a comment

Importance of Cleaning a Septic Truck Tank!

Posted on May 14, 2012 by Andrew Matthews

Septic trucks for sale used to suction out septic tanks are highly specialized industrial vehicles, designed to withstand the rigors of this unsavory job. Daily maintenance and inspections are a priority to ensure things are running correctly; being carefully cleaned after emptying is part of that maintenance. Constantly in contact with infectious and corrosive waste material, these industrial units need adequate protection from harmful elements as do their operators.

A septic pumping job is far from over when the vacuum truck leaves an area after having emptied the septic reservoir. Obviously, the unit’s tank needs to be emptied at a designated dumping facility. Once that has been completed, it is important to clean the vehicle, inside and out, and prepare it for the next day’s use.

Important Handling Steps

Following is a chronological listing of the steps that occur after suctioning raw sewage into a septic truck.

  • Treatment Plants – Sewage is usually taken directly to waste treatment plants where it is offloaded under pressure from the vehicle into a larger sewage holding tank. At this point, the contents are processed through treatment although there is still work to be done before the vehicle can be parked for the day.

  • Sludge Removal – It is critical that the inside of septic trucks are cleaned after off-loading. Solid material left in the bottom will not only become harder to remove, it will begin to take tank space which could affect the ability to completely pump out a septic system. If it is noticed that a truck tank has been filling to capacity and holding less pumped material, it is a good indicator that there is a layer of sludge in the bottom that must be properly removed.

  • Sewage Plant Protection – Cleaning not only protects the machinery but the sewage tanks and equipment at waste treatment plants as well. Receiving mixed or unknown waste material and dumping it into sewage tanks can spell disaster; chemical reactions can take place as well as fires and explosions. Therefore, in order to contribute to protecting what they deal with, treatment plants provide truck wash stations for use before vehicles leave a facility.

Cleaning Procedures

Cleaning the inside of a septic truck varies depending on the type of tank, although most generally have two manhole openings for interior access for this very purpose.

  • Water or Vibration Removal – The interior is sprayed with water and disinfectants where applicable, removing any sludge on the bottom. If there is sludge that is difficult to take out, a device called a vibrator can be attached to vibrate the tank, loosening the inside layers of solid material.

  • Manual Removal – If the above method does not work or if sludge that has been inside the tank for a while, the only way to eliminate it is manually. Operators have to either enter the tank or work from the manholes, digging out any residual material. Once the interior of the vacuum tank and hoses have been properly cleaned of all liquid and stuck-on solid materials, the exterior of the truck can be cleaned to remove any residual waste.

  • Wash Stations – For safety reasons, wash stations are provided with wash water bins. Throughout the entire cleaning process, wash water runoff is collected in large bins since this, too, is now considered to be contaminated. The water in these bins will then be added to the sewage reservoirs.

Only after a thorough cleansing is the vacuum truck considered to be ready for use. There should be little or no trace of any material remaining that was in the truck when the job was completed, making it safe for any subsequent jobs.

Keeping the interior of a septic truck’s tank clean is not easy; however, for the safety provided it is well worth the extra effort. It will also reduce the risks involved when someone has to climb in and dig out the sludge – something that every operator should appreciate. Hopefully this article has provided some valuable insight into the importance of clean septic trucks for sale when the job is done!

Posted in Septic Trucks for Sale | Tagged | Leave a comment

Digger Truck Hybrids Are Here!

Posted on April 30, 2012 by Andrew Matthews

The green movement has long called for hybrid vehicles to become standard technology in the automotive industry; many manufacturers have been ushering in the new millennium by producing a plug-in hybrid electric vehicles (PHEV). The use of environmentally friendly technology is also being applied to heavier equipment. Wisconsin-based Dueco began marketing a line of PHEV utility trucks in the previous decade and unveiled a PHEV version of a digger derrick in 2008. Two years later, Altec introduced a hybrid DM47-TR digger for sale derrick at the World Truck Show. The PHEV technology offers a range of benefits to the type of work utility trucks perform on a daily basis while remaining kind to the environment.


Power Source

The typical hybrid model digger derrick is powered by a strong battery in combination with an internal combustion engine running on diesel fuel. The battery is charged by connecting it to a three-phase 240 volt electrical outlet, which is readily available in the garage where the truck is returned each night. Alternatively, an on-board 5 kw charger can fully restore a battery within 8 hours, saving money by using off-peak electricity. Although developers like Dueco have stated that the diesel engine does not need to be started at all during an average work day, the engine can be engaged when desired to give an additional performance boost to the vehicle operations. By using battery power for the booms, aerial lifts, diggers and compressors, hybrid vehicles can reduce fuel consumption by 5 to 10 gallons per day.


Regenerative Braking

Hybrid technology makes good use of regenerative braking, which transforms kinetic energy generated by moving vehicle parts and transfers it to capacitors which in turn reduces fuel consumption. This recovery mechanism is ideally suited for utility vehicles that tend to stop and start frequently throughout the working day. Brakes also suffer less from wear and tear with regenerative braking, which contributes to the truck’s lifespan.


Job-site Safety

Job-site safety is another factor that is improved by using PHEV technology. When the diesel engine is not used, exhaust emissions are almost completely eliminated resulting in higher visibility, cleaner air and reduced lung cancer risk for on-site workers. The use of battery power over a combustion engine also means significantly less noise at the work-site which allows for better communication between workers and reduces accident risks.


Making Headlines

Hybrid digger derricks made headlines in 2012 when Commonwealth Edison Company, the largest utility company in Illinois and one of the larger in the entire country took delivery of a brand new Terex Commander 4042; this is the first truck of its kind to feature an advanced plug-in hybrid propulsion system from Odyne. The makers of this model promise that the truck will operate even more efficiently and with minimal noise levels and job-site emissions; it is rechargeable using domestically produced electricity harvested from the grid. The new hybrid digger derrick was developed using funding from the City of Chicago and alternative-fuel awards, which in turn were granted from the Department of Energy (DEO) as part of its program for cleaner cities.

Hybrid digger trucks are here to stay and are becoming widely popular all across the United States. They have many benefits and have a positive effect on the environment. Make this new model an important consideration when it is time to purchase another digger for sale!

Posted in Digger for Sale | Tagged | Leave a comment

Collecting Garbage Can Be Automatic With Grapple Trucks!

Posted on April 26, 2012 by Andrew Matthews

Grapple trucks are becoming increasingly popular in the United States as a means of aiding communities with garbage collection and improving working conditions for employees. The traditional method of waste collection involved a normal flat-bed or garbage truck and two or three laborers either walking alongside the vehicle throughout the route or entering and leaving the cab as needed to remove garbage from the streets. This method is sufficient for the collection of normal waste disposal bags and smaller objects; however, it became problematic with bulkier trash that is set out on the route.

Manual Operations

As even smaller communities can generate thousands of tons of waste material every year, manual collection tends to be difficult for the laborers. The difficulty escalates for garbage collectors when faced with the removal of large or heavy objects such as broken machines; goods like refrigerators and ovens; furniture; and bulky waste such as severed branches and stumps. Handling any of these objects is dangerous and any kind of manual heavy lifting carries a risk of back and knee injuries to the workers that must perform such tasks. Even if heavy waste is properly handled, the regular occurrence of bulky objects on a garbage route can be increasingly difficult for workers over time.

Automatic Operations

By introducing grapple trucks or attachment to the routes, many communities have managed to take a lot of weight off the backs of garbage collectors, both literally and figuratively. Driving alongside a regular flatbed truck, a grapple truck is able to lift all kinds of heavy or bulky loads from the street and deposit them onto a flatbed without the driver ever having to leave the vehicle. The immediate health implications of this technique are obvious, as the ground workers are now able to use available time to collect lighter loads and scraps that are too small for the grapple to handle. For solid objects without movable pieces and well-sealed refuse sacks, laborers may not need to be involved at all as the grapple can handle such loads alone.

Cost

Although the introduction of new equipment does come with an added cost, community budgets can be managed efficiently by establishing a separate schedule for bulky trash collection, allowing for the use of a grapple truck on certain designated days. Some communities have introduced regulations that prohibit disposal of bulky waste exceeding a certain volume, although such a method does not solve the issue of removing heavy loads.

This automated method for the removal of heavy waste is becoming increasingly popular in the United States and is being adapted in innovative ways. This technology uses truck-mounted metal arms to pick up and empty garbage and trash cans automatically. Some states favor traditional loader model trucks over the grapple, generally because of the extra training that is necessary for drivers to become accustomed to operating these new machines. In other states, collecting garbage automatically with the grapple truck has revolutionized local waste management. Collecting garbage with grapple trucks can indeed become a very automatic and beneficial addition to any community!

Posted in Grapple Trucks | Tagged | Leave a comment

Important Ways Heavy Equipment Is Revitalizing!

Posted on April 25, 2012 by Andrew Matthews

One of the issues facing many companies who attend heavy equipment auctions is acquiring them without an adverse effect to profits. Such a purchase can be considered a reasonable investment if the machine is crucial to business operations and is anticipated to deliver long-term and dependable service as well.

Such a procurement should be given a great deal of consideration, especially if usage time may not be sufficient to justify such a large cost. There are several options available to acquire such vehicles that offer different advantages and it is important to consider what is the best choice during difficult economic times. One available option is whether to rent or lease such equipment.

Leasing

Leasing may be an appealing alternative for certain firms to consider that do not have enough funds or financial resources to be able to purchase at a heavy equipment auction. It is a great option for businesses needing such vehicles but lack the ability to pay a large amount of cash up front. When such an acquisition method is used to obtain such machinery, it can generate a greater return on investment and achieve higher productivity and profitability by good management and investment of available resources.

The benefit to the leasing party includes flexible terms and payment arrangements that can be based on current market conditions, expected financial movement, equipment needs and tax conditions. Renting or leasing is also a great advantage for companies that do not want to lose money from the normal equipment depreciation. In addition, the extra capital can be used for investment in other business ventures.

Benefits

As a business grows, more of these heavy-duty machines may be required and one way to add to fleets is by leasing. Following are some of the reasons for leasing these vehicles.

  • Money Saving – Using this method of acquisition can help save money. The amount otherwise used for a down payment for the purchase of a vehicle can be set aside as a type of contingency fund and to finance other business needs.

  • Depreciation – Up-to-date machines can be rented and eliminate any worry about what to do with any outdated equipment. There is also the added assurance of not having to pay for most problems or breakdowns.

  • Reduced Expenses – Renting one of these devices means a business will only be paying for actual usage hours rather than have it sit unused at times, losing money. Up front investment costs can be saved as well as maintenance, storage, transportation, warranties, insurance and disposal costs.

  • Flexibility – Renting or leasing gives a company the ability to take on a variety of seasonal jobs that require specialized machines without having to worry if the right vehicle is available for use, saving both time and money.

Many contractors are searching for state-of-the-art methods that will provide a greater advantage for performing different types of tasks rapidly and efficiently. With ongoing technological advances, older models become obsolete much more quickly. Consequently, the risk of owning a machine that will rapidly lose its value can be avoided by renting and leasing these from a heavy equipment auction. Such a method of acquisition offers a means to revitalize a company without having large financial payments to make. The opportunity to gain important financial incentives against rivals just cannot be ignored – so choose leasing to accomplish a better financial future! 

Posted in Heavy Equipment Auction | Tagged | Leave a comment

Auctions Can Meet Boom Truck Needs!

Posted on March 29, 2012 by Andrew Matthews

The boom truck is a valuable machine for various industries such as telecommunications, construction, and electric utility lines; however, it also comes at an overwhelming cost. Thankfully, investing in this type of equipment does not mean that a company has spent excessively since one can be found for a fairly inexpensive price at an auction.

Auction Considerations

It is certainly true that buying a boom truck from an auction is vastly different from going to a manufacturer or vendor to make such a purchase. There are certainly pros and cons with both purchasing possibilities, some of which are listed below.

  • Condition – Unlike buying directly from a commercial truck dealer where it is expected to get vehicles in good working condition, a boom truck sold at an auction is generally used and the condition varies from one vehicle to another. The actual condition can range from a complete lemon to a barely used, top-of-the-line model.

  • Origin – Boom trucks sold at an auction have various origins, including private owner who no longer need the equipment. Most of the time, these vehicles come as part of a fleet, from industries reliant upon such vehicles such as telecommunication and electric line companies, that usually maintain a large number of boom trucks. Once a unit reaches a certain mileage, it is generally sold by the company even if it is still in perfect working condition. This is because of a desire to avoid incurring high maintenance costs from an aging fleet.

  • Cost – There is no fixed value for the equipment sold at auctions since the cost is determined through the bidding process. A seller may indicate a reserve bid or the lowest acceptable amount for the vehicle; however, the price can still vary during the process. This variance in cost is a most appealing factor to buyers, as they will dictate the final cost of equipment and getting a good deal is well within reach.

  • Warranty - Because the majority of vehicles sold are used, it is unlikely to find ones that are still under a factory warranty. Most auction houses also have an ‘as is where is’ policy, which literally means ‘what you see is what you get.’ There is no obligation if the vehicle breaks down after 10 miles of driving or 100 miles of driving. On the other hand, there are some auctioneers that offer a limited warranty on vehicles, such as within 30 days or 3,000 miles whichever comes first. Some brokers do provide a personal warranty for the equipment that is being sold.

Buying Tips

Considering the fact that the majority of boom trucks sold at an auction are used, following are a few helpful guidelines to improve the odds of getting a good deal.

  • Inspection – Before buying any item from an auction, the first thing to do is conduct an inspection to verify its condition. This is particularly true with mechanized equipment such as a boom truck. Have an expect mechanic check the major components of the vehicle such as the engine, transmission, hydraulic system, boom components, suspension, etc. to determine the operating condition.

  • Testing – As much as possible, test the performance of the truck by operating all of its functions, including the mobility of the boom, the engine’s idle, outriggers, transmission, controls and lighting to check for the proper functioning of the internal components.

  • Pricing Guide – After testing, determine the appropriate value of the boom truck. A NADA and Kelly Blue Book are reliable tools for appraising the value of the equipment based on its present condition and depreciation. The rule of the thumb is to never bid beyond the value indicated in one of these guides in order to get a good deal.

  • Warranties – Ask for a personal or limited warranty from the owner or the auctioneer. Most merchandise is sold on as indicated above; however, a few companies that specialize in the sale of heavy equipment and are confident in the quality of the equipment being sold will provide one. This should give a buyer the right to return or ask for compensation in cases when the vehicle breaks down within the time span of the warranty.

An auction is a great place to acquire a boom truck at a significantly lower cost as compared to buying directly from a commercial truck dealer. It is always important to conduct an inspection and determine the appropriate cost of a vehicle before bidding on one to ensure a great buy. When done in this fashion, auctions can indeed meet boom truck needs!

Posted in boom truck | Tagged | Leave a comment

The Productivity of a Vacuum Truck Can Be Increased!

Posted on March 28, 2012 by Andrew Matthews

All business establishments want to be successful and stay in business for a long period of time. This includes companies who use vacuum trucks for daily tasks. There are several ways that profits can be increased, primarily by decreasing expenses and increasing output. This means reducing what is spent on repairs and providing more services to a wide variety of clients.

Since equipment is the primary basis for productivity, companies with a vacuum truck sale that breaks down or is damaged experiences a cessation in normal operational activities, causing a considerable reduction in the productivity rate as well as time and money lost while being repaired.

The key to boosting the efficiency and productivity of a vacuum truck is by having a proper maintenance program; this will keep all equipment in good condition to deliver the best performance possible.

Maintenance

An efficient maintenance program should not be disregarded as it plays a critical role in productivity. Maintenance is like a health care system for equipment. It is required to efficiently cut back on unnecessary expenses and achieve effective, uninterrupted operations. The amount of money spent to prevent problems is small in comparison to the expense of a major breakdown that could stop production.

The primary role of a preventive maintenance program is to make certain that all equipment is running at a 100 percent efficiency rate. By performing daily inspections, routine cleaning, proper lubrication, regular upkeep and simple repairs, any minor damage can be identified and rectified immediately before becoming major problems that could impede the normal business operational flow.

Preventive Maintenance

The cost of an equipment breakdown is often difficult to quantify. Research has been done in an attempt to compare the cost of regular maintenance against the cost of a mechanical breakdown. The results show that the actual cost of a breakdown is much higher when compared to any prior preservation costs. By instituting a general preventive maintenance program and ensuring the equipment is reliable and in good shape, the best productivity is possible from these machines and can in turn generate more revenue.

The challenge to all vacuum truck owners is to be sure the equipment is reliable by keeping a historical record of past and present conditions. The vehicle can then be monitored and any minor problems that are detected can be handled. Because of the latest technology, most equipment has built-in sensors to notify the driver or operator of any potential problems so it can be corrected before the system fails and business activities are interrupted.

Profitability

With the vacuum truck sale industry focusing on a net profit, the amount of money spent for any downtime will have a direct effect on profitability. If a machine shows any wear, replacement parts could be low quality and may not function for an extended period of time. As a result, productivity could decrease and overall profits would fluctuate downward. To lessen any downtime, it is essential to keep a close eye on the machine’s current condition and performance to avoid any unnecessary interruption to a company’s operation.

Productivity can be achieved in many ways; however, for vacuum trucks this can be secured by being sure of proper functioning and good working condition. A common enemy to this industry is downtime; this can be averted by proper preventive maintenance and repair of any minor problems before it becomes a major dilemma. With the proper monitoring and an adequate maintenance schedule, the production of a vacuum truck sale can be drastically increased!

Posted in vacuum truck sale | Tagged | Leave a comment

Top Three Benefits of Buying Digger Derricks at an Auction!

Posted on March 27, 2012 by Andrew Matthews

A digger sale derrick is a heavy piece of equipment that is vital to the operation of various industries for ground drilling. This machine is designed and built to be durable and tolerant under extreme operating conditions, which also explains why it costs so much to purchase.

Fortunately, small business owners who plan on investing in this machine can do so and save money by purchasing through an auction. Following are three valid reasons why it is a good idea to purchase heavy-duty vehicles such as this from a digger sale at an auction venue:

Best Price

The main reason why auctions are gaining popularity is because of the chance to buy items for a low price due to the method of acquisition. This is especially true with major items, such as heavy-duty machinery.

Basically, the price is determined when the auctioneer starts the bidding process at an amount deemed appropriate for the equipment being sold, usually well below market value. From there, buyers on the floor begin to bid on these items, outbidding one another to reach a goal of being able to purchase the vehicle. This process ends when no higher offer is made. At that point, the one who made the highest bid is able to purchase the vehicle for that price.

The ability of being able to control the price of the equipment being sold is a great advantage of purchasing through an auction. Usually, the best deals are made when there is less competition and the price does not rapidly escalate. Of course, this is not always the case and the price can easily go beyond market value if there is high demand for the item.

Quick Turnover

The turnover rate is much faster as compared to traditional sales methods. During these auction venues of digger sales, the equipment is presented to buyers for bidding. From that point, the sale concludes in just a matter of minutes; once the gavel hits, the item is considered to be sold to the highest bidder.

The successful bidder can immediately pay for the purchase with the auction company either in cash or by presenting a pre-approved line of credit from a financial institution if the purchase is being made through financing. All documents pertaining to the purchased vehicle is in the hands of the auctioneer and will be given to the buyer once payment is made.

Numerous Choices

Because the digger derrick truck is a specialized type of vehicle, it is rare for commercial truck dealers to have one on their lot; that is certainly frustrating when a certain make, model or specifications is needed. At an equipment auction, it is very different as sellers are often large companies liquidating assets in bulk which means there are many choices available for buyers.

Tips for Success

Before bidding on any type of mechanical equipment, always take time to conduct an inspection. Most auctioneers allow buyers to inspect and test vehicles prior to the auction in order to determine the appropriate value of the vehicle.

At the event itself, it is quite easy to make the mistake of overbidding due to the intensity and competitive atmosphere. To avoid this mistake, refer to a pricing guide such as the Kelly Blue Book or NADA to determine the value of the equipment based on its condition and depreciation; never bid higher than the indicated amount in these guides.

A digger sale auction is a practical way of purchasing expensive equipment such a digger derrick. It provides an opportunity to buy these machines inexpensively. It is also a quick way to acquire these vehicles, especially when starting a new business venture that needs to be up and running in no time. The benefit of these venues is that they usually have many makes and models to choose from so there are many options and a vehicle that is best suited to particular business needs can be chosen. Hopefully these three benefits to buying from an auction will prove useful in the acquisition of these trucks!

Posted in Digger Sale | Tagged | Leave a comment

Become an Oilfield Vacuum Truck Driver!

Posted on March 26, 2012 by Andrew Matthews

Being a vacuum trucks for sale driver is not an easy job, especially when it is in the oil and gas industry; it involves the transportation of various types of equipment and supplies to and from job sites. It could include the conveyance of oversized, highly flammable, or explosive cargo over long distances requiring safe and efficient operation. When choosing a new career path and searching for a meaningful job in today’s economy, deciding to become a vacuum truck driver in the oil fields could give provide many fulfilling opportunities.

While it is vital to have a good income and be well-compensated; the most important step to a meaningful, fulfilling and rewarding career is to be passionate about the work being done every day.

Career Opportunities

The most basic step when choosing a career is to keep in mind the factors that are motivating and inspiring. Current job seekers are trying to find a particular niche in the job market that both pays well and offers job security. There are many career opportunities available and it is just a matter of finding such favorable circumstances The search for a fulfilling career should be based on a job that is: interesting; exciting; stirs up personal compassion; evokes the imagination; and provides real satisfaction. One career path that can spark one’s interest and be exciting is entering the field of vacuum truck driving for an oil or gas company.

Necessary Skills

Once a decision has made, it is time to take a moment to think about the skills that are required for this type of job and if such skills will have to be acquired. Don’t be overly concerned if certain specific skills will need to be learned for this type of work, as a good training program can fulfill most of what will be needed. During training, prospective applicants have the opportunity to decide if this is a job that can truly provide fulfillment and satisfaction.

Qualifications

Generally, applicants must know how to safely load, convey and properly dispose of waste products or “brine water” that are produced in the oil industry. This waste is not allowed to be released into rivers or other bodies of water because of its salt content that is very toxic to living organisms. This hazardous liquid must be transported by skillful vacuum truck drivers to proper treatment facilities.

To qualify for this position, prospective applicants must have a background in math and science. Such knowledge would include: how to compute the volume of basic sediments in water or impurities contained in crude oil; safety training associated with material handling; a clear driving record; no criminal cases or traffic violations such as speeding, reckless driving or DUI/DWI convictions; and a Class-A Commercial Driver’s License (CDL).

There are many careers available that are right around the corner. Finding one is simply a matter of research, having a positive approach towards safety, acknowledging strengths, and having the will and positive attitude to discover and learn a new set of skills. Having driving experience can be the start of a new career and a better future. In fact, an oilfield vacuum truck for sale driver could be an occupation that is not only very interesting, but one that also provides personal meaning and fulfillment as well as providing an opportunity for personal growth!

Posted in Vacuum Truck for Sale | Tagged | Leave a comment

Auctioneers Must Follow a Code of Conduct!

Posted on February 29, 2012 by Andrew Matthews

Regardless of the type of business, certain standards of ethical behavior are expected that are relevant to each business and auction companies are no exception to such a principle. Basically, a code of conduct is about the professional responsibilities of a business and its employees to follow the law, avoid conflicts of interest, respect confidentiality of information, avoid bribery, and be fair in any type of business competition, just to mention a few. Heavy equipment auction companies are obligated to create an atmosphere that contributes to positive values as well as fosters honesty and integrity. Following a certain code of conduct means the company behaves in a manner that protects the customer’s interest, thereby showing the public what to expect when dealing with it and its employees.

Introductory Statement

Generally, an introduction or mission statement explains the duty of a company to operate in a manner that protects the general welfare of its customers and employees, elicits trust, and cares about the well-being of customers while promoting its own growth. A code of ethics must be the motivating force that drives employees to perform job responsibilities with a demeanor that is just and fair. Any employee who does not comply with a company’s code of ethics should receive corresponding disciplinary action. In addition, complaints may be filed in the event expected professional duties are not met.

General Provisions

In most cases, such codes are enforced to address certain unethical issues that could harm the interest of consumers, clients, employees and the company. These ethical standards should be clearly communicated to employees so it is known exactly what type of conduct is expected from each worker. Following are some examples of types of ethical behavior that should be expected from those who conduct heavy equipment auctions:

  • Promote Best Interests – An auction house should promote the interest of both the seller and the buyer who should be treated legitimately, honestly and fairly at all times.

  • Open Payment Handling – No compensation should be taken from a third party without the full knowledge of those involved in the transaction.

  • Reveal Conflicts of Interest – Potential conflicts of interest must be revealed to clients at the beginning of any professional relationship.

  • Prior Payment Authorization – Approval must be obtained from a client for any expenditures or profits made on their behalf.

  • No Illegal Actions – A company and its employees should not participate in any activities that violate the law.

  • Maintain Confidentiality – No confidential information shall be disclosed to a buyer without prior approval unless demanded by law.

  • Follow Code of Conduct – A company must faithfully follow their own code of conduct at all times.

  • Auctioneer Conduct – Auctioneers who commit a crime, violate the law, or are found guilty of dishonorable conduct and continue to participate in these types of activities should receive corresponding punishment and be prevented from exercising any rights and privileges associated with such a job.

  • Licensing Censorship – Any license issued to those involved in the operation of this type of business shall be revoked due to misconduct or inappropriate behavior in relation to the bidding process.

Broadly speaking, any code of conduct that is adopted by any type of bidding house, including those involved in heavy equipment auctions, is based on the concepts of: honesty, integrity, fairness, confidentiality, and legality.

Ethical standards pertaining to the operation of an auction company have been formulated to regulate the bidding process. It encourages all employees to respect the dignity, diversity and individual rights of all parties involved in a heavy equipment auction. Just like any other type of business, auctioneers are expected to follow a comprehensive code of conduct that explains the expected type of behavior as well as what the duties and responsibilities owed to the auction company, its clients and all bidders!

Posted in Heavy Equipment Auction | Tagged | Leave a comment